Views: 351 Author: Site Editor Publish Time: 2022-08-10 Origin: Site
Thelocking plate is a fracture fixation device with a threaded hole. After a screw with a threaded head is screwed in the hole, the locking plate becomes an angle fixation device. The locking steel plate can have both locking and non-locking screw holes for screwing in different screws (also called combined steel plate). Since the concept of locking plate was proposed and applied to fracture treatment, due to its advantages of providing stable support and fixation of fractures, higher fracture healing rate, less soft tissue damage and blood supply damage, locking plates have been widely used in joints. In this article, we will specifically introduce some knowledge about the locking board.
Introduction of the locking plate.
The advantages and characteristics of the locking plate.
The multi-axis locking plate makes the bone and the plate more secure, and makes the broken limb more stable after reduction. The multi-axis locking plate is a fracture fixation device with threaded holes. After these holes are screwed in with a screw with a threaded head, the plate becomes a (screw) angle fixation device. It can have both locking and non-locking holes for screwing in different screws. Any steel plate that can be screwed into an angle-fixed (stabilized) screw or bolt is essentially a locking steel plate. There can be a certain gap between the multi-axis locking plate and the bone surface, which eliminates the adverse effect of the heavy pressure contact between the plate and the bone, and greatly improves the growth and recovery of blood supply and periosteum.
The locking screw is a self-tapping screw, which does not require tapping or bone drill; there is no pressure between the locking plate and the cortical bone, and no pressure is exerted on the periosteum, thereby protecting the blood supply of the periosteum. The surgical technique can meet the requirements of minimally invasive operation. It can protect the local blood supply of the fracture well, and no bone grafting operation is required; the internal fixation bracket is elastically fixed, and there is stress stimulation between the fracture pieces in the presence of load. This stimulation is conducive to the formation of callus and fractures. heal.
The locking plate is anatomically designed to adapt to the shape of the bone.
The locking plate can avoid the risk of simple screw fixation of bone fragments.
The locking plate is a low-cut design to avoid postoperative phenomena.
The locking plate is fixed at multiple angles to provide better fixing stability.
A locking plate product owned by Jiangsu Jinlu Group Medical Device Co., Ltd.
Jiangsu Jinlu Group Medical Device Co., Ltd. is located in Zhangjiagang, an international trade port on the lower reaches of the Yangtze River. The company's main products are orthopedic equipment, and "Golden Deer" brand medical equipment for general surgery, thoracic, and gynecology. Orthopedic instruments include fracture fixation plates, fracture screws, anatomical fracture plates, locking intramedullary nails, spine retainers, hip joint prostheses and other related instruments.
If you are interested in our company's locking plate, you can buy it directly on our company's official website, and we will provide the best locking plate products and services.
