Views: 0 Author: Site Editor Publish Time: 2022-08-29 Origin: Site
During tibial surgery, the doctor will use tibial nails. In this article, the tibia nail will be introduced.
Introduction of tibia nails.
Precautions for tibial nails.
All tibia nail products of Jiangsu Jinlu Group Medical Device Co., Ltd.
Tibia nails are non-active surgical metal implants for bone joints, which are composed of cortical bone nails (full thread and half thread) and cancellous bone nails (full thread and half thread). Tibia nails are used for stabilizing new fractures, revision surgery, joint fusion, and can be used for adult and pediatric patients. The tibia nail is composed of a front edge, a middle column and a tail. The blade has a flat blade, a tapered blade and a threaded blade, and the end has a round, square, triangular, and flat shape.
1. Maintain tibia fracture reduction to fracture healing
Another important issue after the fracture is reduced is to maintain the position until the fracture heals. The following techniques can help maintain the fixation after reset:
a. The distal end of the tibial nail is firmly fixed. At least two screws are required for a firm fixation of the distal end of the tibial nail. For some specially designed intramedullary nails, the number of distal screws must reach 4. In theory, an increase in the number of screws will increase the strength of the distal end fixation.
b. Choose the thickest screws in the appropriate range, put in as many numbers as possible, and the screws need to be dispersed appropriately. These principles are basically similar to those of the external fixation frame.
c. The distal point of the tibial nail should be as close as possible to the ankle joint surface, but not too deep. The reaming depth can be controlled by bending the guide needle. Or simply choose the distal end without reaming to obtain the stability of the distal bone block.
2. Don't miss other fractures
Many cases of fractures of the middle and lower part of the tibia involve the ankle joint surface. These cases need to be carefully evaluated before surgery, and CT is best. For cases with ankle joint surface fractures, the intra-articular fracture block must be fixed before tibial nailing.
Jiangsu Jinlu Group Medical Device Co., Ltd. is located in Zhangjiagang, an international trade port on the lower reaches of the Yangtze River. Founded in 1958, the company is engaged in the development, manufacturing and sales of orthopedic equipment. It has become one of the key external fixation equipment manufacturers for medical equipment in the country and a governing unit of China Medical Equipment Industry Association. The implant manufacturer has 62 years of experience in the manufacture of orthopedic implants and tibial nails.
The manufacturer of orthopedic implants uses orthopedic devices as its main products, and mainly uses "Golden Deer" brand medical devices in general surgery, thoracic, and gynecology. The orthopedic instruments manufactured by this orthopedic implant manufacturer include fracture fixation plates, fracture screws, anatomical fracture plates, tibia nails and other related orthopedic instruments.
Our company is a better tibial nail manufacturer. If you are interested in tibial nail products, you can get in touch with the company. This orthopedic machine manufacturer will provide you with the best tibial nail products and services.
